You are here: PureEnergySystems.com
> News > June 18,
Volunteer Jon Abel banned from NDSU for Stanley Meyers lab research
After spending 15 months as a volunteer doing research at North Dakota
State University (NDSU), seeking to replicate the work of the late Stanley Meyer,
as well as the MEG, Jon Abel was banned from the campus. He speculates that it
has to with the university's being sponsored by the oil fracking industry.
Volunteer, Jon Abel with NDSU technician, Lew
Pure Energy Systems News
On June 16, I received an application from Jon Abel, who was wanting to
join the B-Hex discussion list.
His closing comment caught my attention: "I was banned permanently
from NDSU for replicating the Stan Meyer Water Fuel Cell."
For those of you who might not be familiar with Stanley
Meyer, he is alleged to have developed a technology that enabled a
vehicle to run on nothing but water.
I asked Jon if he wouldn't mind telling us more about what happened, and
letting us publish it at PESN.
In closing, he notes: "NDSU gets tax revenue money from the from
the ND oil (fracking) industry, and this likely started a conflict of interest
that they were unwilling to fix."
I tried contacting David Wells and Ray Boyer of NDSU via phone and email to get
NDSU's position regarding what Jon has described here, but so far, neither of
them have responded.
"No comment" is indeed the official stance I received from the General
Counsel's office when I persisted further a day after we ran this story.
"This individual's banning from campus had nothing to do with research they
were doing, and that's all we're going to comment." (Conversation recording
on file, but not linked here because I neglected to inform him that the call was
If their reason is around his intended use of a Taser as a power source, it
seems to me that they are off-the-chart hypocritical and hypersensitive. Jon's
intended use is what I would call resourcefulness and has nothing to do with criminality or
reckless danger. With
proper mentoring oversight, it could have been a great way to avoid a very
expensive alternative. The police in this nation use Taser's like they are the
latest fad, with nary a thought about its dangers to the victims; yet when a
civilian seeks to use one for research purposes having nothing to do with its
intended use, the establishment gets all worked up. That is hypocrisy and a
The following is Jon Abel's story:
Lead-in to NDSU
I first went to college at the University of Minnesota, Duluth, for Computer
Engineering back in 1989. I didn't finish, due to illness, but I did learn
much over the 4 years that I was there.
I first heard about Stan Meyer when he died back in 1998.I had heard about the
coroner's report which pointed towards an aneurysm, and his brother's statement
about the poisoning, which was disregarded. My first question to myself was,
"Why would anyone kill somebody like that?"
At first, I thought Stan Meyer was a quack, but I always had a question in the
back of my head about whether his inventions worked. I watched his video
biography "It Runs on Water", but didn't go much further than that -
in terms of research.
Then I found out about JLNaudin's website in
2001-2002. I looked at his replication of Stan's fuel cell, and the Bingo
Fuel Reactor, and the MAHG. Again, I thought it was interesting research,
but these scientists didn't have enough credibility (in my mind) for me to
follow in their footsteps.
in 2005, I found a 2nd website for JLNaudin.
And, there was a news article showing
Kofi Annan visiting JLNaudin's laboratory, and I realized that he was a renowned
scientist in France, and displayed many circuits on his website which, apparently,
had over-unity measurement results due to high-frequency, high-voltage inputs -
and using electromagnetic materials. He had also built a Stan Meyer Water
This increased my curiosity 10-fold, but I fell into the same arguments as many
other people: "The economy is good, who needs to study energy devices?
We have plenty of oil, why bother?"
Then, in 2003, I went back to school for IT - and at the same time - I started
reading about an event called "Global Peak Oil". Over the next
few years, evidence started building up for me, and I realized "Peak
Oil" was already occurring. In 2006, I got a job with Microsoft, but
I was shunned by co-workers for talking about alternative energy. My job was in
North Dakota, where oil fracking is now the #1 industry in the state. My
boss told me to stop talking about it, so I decided to write a book about the
United States economy falling apart, running out of petroleum, and living on
state-run farms, etc. I found a large amount of new and different
technologies online that weren't being utilized by our country, so I put them in
I got about 250 pages into the book, and realized that I wasn't making many
friends at work because of it. I was let go in January 2008, and 9 months
later, the economy fell apart.
Volunteer Lab Work at NDSU
I never went to school at NDSU, but I was working on-campus at the IT Helpdesk
during the time of the economic breakdown. I went on to do other jobs
since, but always ran into backlash when talking about alternative energy.
I got a McDonald's Tech Support call center [job] after I worked at NDSU, and worked
there for 2 1/2 years. During that time, I ran into some medical issues
and realized that things weren't getting better in my life - health-wise, or
money-wise. I realized that the economy wasn't going to get any better,
and I decided to reach out and ask NDSU to help me build a hydrogen machine.
I was finally going to do what I wanted to do without people bothering me.
This was in April of 2010.
I didn't know anybody very well at NDSU, so I just asked where to find the metal
shop. I knew how to put circuits together, but I needed help cutting
things out, and to understand how to construct the parts. I showed up at
Dolve Hall 137, the on-campus shop for the IME Department (Industrial and
Manufacturing Engineering). I asked an older technician named Lew Daily
if he would help me build a hydrogen machine.
I told him that I wasn't a student, but would volunteer if Lew would help me.
He was a Nikola Tesla fan, so I advised him that a Tesla coil needed to be built
into the machine. We asked the professor running the shop if it was OK,
and he agreed. His name is Dr.
Dave Wells. Strangely, all the people in the lab (Lew Daily, Dr.
Wells, and the rest of the technicians) are in their 60's. Dr. Wells went
as far as telling me he would help get grant funding if I could get the hydrogen
machine to work.
I was surprised they said that they would help. I read the Stan Meyer Tech
Brief and some of the patents, and realized that I needed mostly wire and
magnetic material. I started emailing different companies and received
approximately $4000 worth of silicon steel, and other core material from nearly
10 companies over 6 months. AK Steel, Arnold Magnetics, Hitachi MetGlas,
Grainger, Magnetics, and some others. I couldn't afford 430 wire at the
time, so I was using copper wire for the experiment.
When I first went to NDSU, I had built a rudimentary Dave Lawton Pulse Width
Modulator that I found in one of the Patrick Kelly documents. D14.pdf. A technician named Jeff Erickson in the EE
department tested and verified the PWM back in 2010, and also loaned me an
oscilloscope and a power supply to use in the IME department.
For a few months, we got sidetracked with building a MEG device - using MetGlas
C-Cores, but it didn't work quite right, and I finally went back to finishing
the hydrogen machine.
Lew Daily did some CAD work and helped me wind the transformers.
I also worked with the Communications department to write a small
book on Sustainable energy. I am on page 24, standing with Lew
Daily. Other professors got mad at me for initiating this book, and so
many other students also ended up in the book. Even though it was my idea,
my story ended up last. I didn't mind, since I was a volunteer.
Finally, in March 2011, Lew Daily started pressuring me to finish the machine,
so I bought some 8" inch ferrite rods from Ebay, and wrapped them the way
that JLNaudin had done - bifilar.
I then attached my 4-input PWM to 2 NAND gates, and the rest of the JLNaudin
circuit. I had trouble with using a primary/secondary, so I just hooked up
the bifilar with a Bridge Wave Rectifier, and got the rising pulse signal on
June 1st, 2011.You can see my video on YouTube of the single pipe-set.
That was June 1st. Jeff Erickson was the EE technician that was talking
behind me on that video. I applied for a teaching position on campus.
At the same time, I was loosing my job doing tech support for McDonald's, but
continued trying to get as much done at NDSU as possible. NDSU found out
about my employment troubles and technicians started pressuring me with implied
threats that I was going to get poisoned, or shot in the head.
One Mechanical Engineering technician named Shannon Viestenz advised me that the leading hydrogen expert
on-campus (a mechanical-engineering professor named Dr. Robert Peiri) was
attempting to get me banned from campus. He said it was because they
wanted to take credit for it, instead of me. I had gotten permission from
Dr. Dave Wells and Michael
Borr from the NDSU Safety Office for 100 hours of outdoor testing, due to
the conditioning process, but Shannon advised me that Dr. Robert Pieri went to
the Safety Office after I did. I was not told why, or what was said.
The same week, I lost my job at McDonalds. They knew that I was
volunteering at NDSU. McDonalds called NDSU and told them I lost my job.
I was standing next to the shop coordinator, Chuck Choate, when he received the
I didn't care what they had to say to NDSU, so I ignored it at the time.
Later, I realized that the HR department gave my medical information to NDSU,
which later ended up on a police report.
Obviously, I felt the heat coming down at NDSU, so I borrowed the oscilloscope,
and power supply and went out to my parents to test the machine with 7 pipe-sets
for 3 days. I rewrapped the coil, to include a primary/secondary, and
got rid of the Bridge Wave Rectifier. I turned up the frequency further,
and that is when my "rising pulse signal" changed, and I hit
resonance. I finally understood what Stan's resonant signal was supposed to look
like. Some of my YouTube videos show this.
When I got back to campus, Dr. Wells changed his tone, and advised he would not
be able to help me with grant funding. He also said I could not
cross-collaborate with the chemistry department for a safe place to test
it. He said outdoor testing was the only option.
At that point, I didn't know how I was going to pay for a better transformer to
power the machine. I decided to purchase a $25 taser to try forcing
the high-voltage reaction, and emailed a number of people on campus of my
I returned to campus and setup my machine outside Dolve Hall, and showed the
Chair of the EE department, Dr. Jacob Glower, how the signal could resonate.
I hooked up a couple of light bulbs to show free-electron activity, as well.
I didn't even bother trying to use the taser.
10 minutes later, I was in hand-cuffs, and being told that I needed to end my
project by campus police. The campus police also cardoned off the back
parking-lot of Dolve Hall with yellow tape as I was running my experiment.
They gave me a trespassing warning and told me to not come back due to the
controversial nature of the machine.
Dr. Wells showed up 20 minutes later, and told the police to let me go, so
they did. I wasn't allowed to return to the lab to get my coat, so the police
went through my coat and found the taser. Strangely, I was not arrested,
but instead, they continued to escort me off campus. They didn't find the taser
on my person, but a week later, they charged me with a concealed weapon.
The charge was dropped in November of 2011. I requested them to lift
the ban, but they continue to refuse.
I didn't have a flow meter at the time I was testing at NDSU. I just
know that the small amount of current being drawn during resonance was not
following Faraday electrolysis behavior. The measurements were directly
from the displays on the power supply. Lew Daily, Chuck Choate, Dr.
Jacob Glower, Dr. Dave Wells, Jeff Erickson, Shannon Viestenz, Dr. Robert Peiri, 2-3
other professors, 2 IME technicians, and 2 NDSU police witnessed this machine
working over the course of 10 days - June 20th to June 30th, 2011.
I tried a few days later to get help from the Dean of Science from MSUM in
Moorhead MN, but she spoke with NDSU, and banned me for 1 year, without a
3 months ago, I found out that Jeff Erickson was trying to help students with a
Senior Project, and he emailed me - requesting transformers. I asked if
they were lifting the ban, but he didn't think so. I refused to help him,
and reported him to the Dean of the school for stealing my idea. Nothing
was done, and they are probably still working on it.
Again, I asked both the Fargo Forum, and the High Plains Reader to do a story on
me and the construction of this machine. They cannot obtain any
comments from any NDSU professors or security on-campus.
I will send you some video links, showing how to go from the "rising
pulse", to the resonate signal in my next email.
[click here to
access the files]
I got a new job last August, working for a national company that does
outsourced IT for banks, insurance companies, and retail stores. I travel
ALOT, and put 80,000 on my car in one year. I travel the tri-state area of
MN, ND, and SD. Luckily, they pay me mileage and an hourly wage.
The police found a cardboard box, and gave my circuit back to me the day I was
escorted off campus. They didn't believe I was using tap water to run the
machine, so they confiscated the pipes I had soldered together, and apparently
tested them over the next 2 weeks. The pipes were eventually returned, but
fell apart after a few months, due to "brittlization" of the silver
solder which held them together.
I was allowed to return to campus one time - to collect 365 pounds of silicon
steel from AK Steel, since it was too heavy to lift when I was forced off campus
the first time. The NDSU head of police is Ray
Boyer. I have written to him hundreds of times to explain the
technology and make the case to return to campus. The emails have fallen
on deaf ears.
The resonance signal is a duplicate of the Stan Meyer signal that you can find
on page 137 of the Tech Brief. I am attaching figure 6-3, so you can see
what Stan is talking about. I will also attach my photos and a video link
showing my replicated signal.
The tech named Shannon Viestenz in mechanical engineering gave me the run-down before I left. Dr. Robert
Peiri, and Dr. Dave Wells conspired to have me removed from campus, so they
could take credit for the work themselves. The MetGlas cores that were
donated were meant for the navigation systems in Minuteman Missiles, and I told
Dr. Wells to secure them while we were working with them.
Dr. Dave Wells never locked them up, and the cores disappeared when I was told
to leave campus. I emailed the FBI (weapons of mass destruction division)
and explained what happened. I have not heard back. MetGlas will
likely not send me any more cores.
I also received 6.5 percent silicon steel from JFE Steel, the stuff that goes
into the regenerative braking systems for Toyota hybrid automobiles.
I am looking for a cheap, variable 100-1000 watt cutting laser, but they are
expensive. I have a lot of material to cut.
Again, look at my pictures on Facebook under "Jon Abel".
The videos that show resonance:
(June 1st, 2011)
(June 20th, 2011)
(June 20th, 2011)
(June 20th, 2011)
(May 3rd, 2012)
(unpublished - 15 minute video showing how to reach rising pulse signal).
(unpublished - 3 minute continuation - showing actual resonance).
I believe the parties responsible for this ban go all the way up to the ND Board of Higher Education.
Dr. Dave Wells signed a paper saying he didn't give permission to test the machine.
[If that were true,] he should be fired due to ethics violations for allowing my volunteer work to go on for 15 months.
Dr. Robert Peiri likely felt jealous, because he was using tanked, pressurized hydrogen to assist running a diesel tractor 3 years ago.
I was not pressurizing my gas, which made it inherently safer. Dr. Peirre's trip to the safety office likely started the ball rolling towards my ban from NDSU.
I have spoken with Grant Shaft, the head of the BHE in ND, and he will not help lift the ban.
I have spoken with Dean Bresciani, Chancellor of NDSU, but he will not lift the ban.
I have spoken with head of police at NDSU, Ray Boyer, and he will not lift the ban.
NDSU gets tax revenue money from the from the ND oil (fracking) industry, and this likely started a conflict of interest that they were unwilling to fix.
I was not producing enough gas to run an engine. My concentration
at the time was to compare Faraday electrolysis I-V response to this new method.
They are quite different. I have since built a 13 cavity coil to reach
2000 volts and am attempting further studies on my own.
Electrolysis melted my wires at an input of 5 volts / 5 amps. With the
coil, and at resonant signal, 28 volts / .25 amps.
The local papers won't write a story about me because NDSU has "no
comment" about the work done, and was only a volunteer for 15 months, not a
student. Some of my videos are on YouTube at channel "joabel19711". I can send you links to the rest, but some are indoor testing and could get me
in trouble. I was also the anonymous contributor of the designs for the
Stan Meyer injectors on the RWGResearch site. Ask Russ Griess; he will
verify it was me.
The High Plains Reader (local alternative paper) interviewed six people I knew at NDSU. All had no comment. The Fargo Forum refused to write a story without comment about my 15 months of volunteer work or my machine. The Head of NDSU police continues the ban, even though I had permission from my teacher and the Safety Office on campus. He has signed a paper saying that he didn't give permission. I found out three months ago that the EE department at NDSU was still trying to replicate my work as a Senior Project, and emailed me - asking me for transformers. After banning me, they attempted to also press a concealed weapons charge for trying to power the machine with a taser. Charge was dropped due to no evidence. [On] June 29th, 2012, will be 1 year of being banned. I attempted to get help from MSUM in Moorhead, MN, afterwards, and they banned me too, after they spoke with NDSU. No reason given.
Dr. Val Marinov taught the IME Materials class I audited. Dr. Tim Peterson
in Business taught the entrepreneur class.
There was another professor who said she could test for chromium and other
chemicals in the water for $10. Her name is Dr. Victoria
Gelling. She worked in Polymers & Materials Dept. She was later
pressured to not give me the results.
The Communications teacher, who had her students write the book, was Dr. Elizabeth Crawford. I was also allowed to audit two classes while at NDSU, for entrepreneurs and metal cutting.
There are current legal issues, since NDSU is under investigation by the EEOC for coercing my former employer into giving out my medical data to help keep me banned. It's embarrassing, and it will be over 6 months before EEOC finishes.
The company I worked for that shared my medical was a wholly owned subsidiary of
McDonalds called RTS/RADI - restaurant technology services . HR manager
listed as the culprit is Craig Johnson.
This isn't part of the article, but I am running into issues getting a permit to test hydrogen inside a ventilated garage. City of Moorhead explicitly won't issue a permit inside city limits. I can build on my father's land 30 miles south, but Wilkin County also doesn't have a permit for this. I called the Minnesota State Fire Marshall, who tried to send me back to the county. He finally advised that a professional safety or mechanical engineer could certify a building. Does anybody do this for hydrogen - that you know of? Any assistance in what and who to ask?
# # #
What You Can Do
- Pass this on to your friends and favorite news sources.
- Click to Tweet: https://clicktotweet.com/I503H
- Contact NDSU administration to express your disgust with this situation.
- Donate to PES Network
to help us keep this news and directory and networking service going.
- Subscribe to our newsletter
to stay abreast of the latest, greatest developments in the free energy