You are here: PureEnergySystems.com
> News > January
Cold Fusion getting hot with 10kw heater prepping for market
Italian inventor, Andrea Rossi, claims to have an industrial product
ready to manufacture that produces large amounts of energy reliably, safely, and
much cheaper than coal or natural gas power. It utilizes the fusion of hydrogen and the common element nickel at relatively low temperatures.
D. Allan, with Buddy of Georgia, USA
Pure Energy Systems News
Andrea Rossi, left, demonstrates the 10 kW
heat generating device during the Italian press conference last Friday.
Photo by Daniele Passerini, the who reported the day's proceedings in
Last Friday, January 14, we reported
about a press conference held in Bologna, Italy in which Professor Sergio Focardi
and Eng. Andrea A. Rossi, both of the University of Bologna, announced to the
world that they have a cold fusion device capable of producing more than 10
kilowatts of heat power, while only consuming a fraction of that. This is the first public demonstration of a nickel-hydrogen
fusion reactor capable of producing a few kilowatts of thermal energy.
At its peak, it is capable of generating 15,000 watts with just 400 watts input
required. On Saturday, a forum
was opened allowing for questions online from around the world.
This recent public demonstration alone is is a huge development, but what's
more, they also claim to be going into production, expecting to have these
available for purchase commercially within a year. This would become the
world's first commercially-ready "cold fusion" device. The first
units are supposed to ship in three months, with mass production commencing by
the end of 2011.
Licensees are mentioned, with contracts in the USA and in Europe. Mass production should escalate in 2-3
years. Presently Rossi says
they are manufacturing a 1 megawatt plant composed of 125 modules.
In his forum, Rossi wrote:
We have passed already the phase to convince somebody. We are arrived to a product that is ready for the market. Our judge is the market.
In this field the phase of the competition in the field of theories, hypothesis, conjectures etc etc is over. The competition is in the market. If somebody has a valid technology, he has not to convince people by chattering, he has to make a reactor that work and go to sell it, as we are doing.
Inquiries about purchasing are to be directed to email@example.com
Rossi estimates that the cost of energy made with this system will be below 1 cent/kWh, in case of electric power made by means of a Carnot cycle, and below 1 cent/4,000 M J in case of thermal power production for heating
purposes. That is several times cheaper than energy from fossil fuel
sources such as coal or natural gas.
According to Rossi, the demonstrated device shown last Friday is their industrial product that is claimed to be reliable and safe. In normal operation it would produce 8 units of output for every unit of input. Higher levels of output are possible, but can be dangerous. They will soon start serial production of their modules.
Combining the modules in series and parallel arrays it is possible to reach every limit of power. The modules are designed to be connected in series and
In describing the batch processing operation of the device, he said:
"To start up the reactor you have just to turn on a switch. The reactor works with enormous margins of safety, so there is no need of a particular skill. Just follow the instructions. The
refueling is every 6 months and will be made by our dealers."
Rossi also says that they have had one reactor that has run continually for two
years, providing heat for a factory. Also, the reactors can self sustain by turning off the input, but they prefer to have an input.
The device will be scheduled for maintenance every six months. You control
it "just as you turn on and off your television set."
Here's a video excerpt
of the demonstration in Italy last Friday. They allowed
six people at a time to go into a smaller room where the equipment was
located. The tac, tac, tac sound is made by the water pump, which is a precision
dosator. You can see all three videos (in Italian) on the efagroup2010
According to Daniele Passerini who reported Friday's proceedings in his blog,
the private invitation press conference was attended by around 50 people.
Professors from the University of Bologna were on hand to verify that the
experimental set-up was credible. Rossi explained that they were producing from the reactor about
10-12 kW, while the average energy input was 600-700W, which was also measured
by the dryness of the
steam. The experiment was performed by the patent application holders and professors from the University of Bologna unrelated to the project.
The amount of energy being produced was estimated based on how much water is vaporized
per second. Also, to understand the source of the process of energy production,
they sought to ensure that hydrogen was not being burned, by measuring the mass at the beginning and end of the
experiment. A professor Levi used two sodium iodide scintillators to measure the radiation output.
Today, Rossi said:
"The report of the test that has been made by the independent reviewers in
Bologna will be put online as soon as the Prof. of the University of Bologna,
who made the test, will deliver it. I think it will take a week, while they are
elaborating the data. The publication will be made on the Journal of Nuclear
Physics, and all the magazines and blogs will be free to publish them."
According to a Rossi-Focardy
paper (p. 4 of 9), similar results have been obtained in the factory of EON in Bondeno (Ferrara, Italy) in a test performed with
ENEL spa on June, 25th 2009; as well as in tests made in Bedford, New Hampshire (USA) in a lab of
LTI with the presence of the U.S. Department of Energy (November 19 2009) and of the U.S. Department of Defense (November 20
research was published by New Energy Times in 2004. And even earlier
in November 1998 at LENR-CANR.org
In March of 1995 came a report
titled "Italian cold fusion succeeded", stated that a 40-watt battery
had been operated for four months continuous. So these guys have been at
this for a long time.
Doing a lot of digging into Rossi's Journal of Nuclear Physics blog
shows that scientists are posting and linking speculation that "hydrinos"
Power fame) or shrunken hydrogen atoms may be involved in this cold fusion and process and their formation may be the source of most of the energy released.
Rossi Energy Amplifier
They have filed for a PCT patent, number WO/2009/125444,
published October 15, 2009, but they are keeping some information proprietary
until the patent is awarded.
Simply put, the effect involves pressurized dihydrogen gas (2 bars is the lowest mentioned in the patent
application, and 80 bars is what was used in the demonstration) is placed in metal tube with nano powdered nickel and a heating element (resistor). Somehow the dihydrogen gas is split into atomic hydrogen. When heat is applied the atomic hydrogen reacts with the powdered nickel to produce energy up to 400 times the input energy. Undisclosed catalysts are used to increase the efficiency of the cell.
Andrea Rossi is listed as the inventor. He is also the primary operator of
website and forum, where the information about the technology is posted.
Some other technical attributes of the process include:
- Regular Ni is used even though other isotopes may provide better efficiency. They think all the isotopes work to produce the effect.
- For some unknown reason, not all of the Ni in the cell reacts with the hydrogen to produce energy. The percentage of the Ni that reacts is very low.
- Even though the percentage of the Ni that reacts with hydrogen is very low one kilogram of
nickel powder should deliver 10 kW of energy for 10,000 hours. The consumption rate of hydrogen and nickel are 0.1 g of Ni and 0.01 g of H to produce 10 kWh/h.
Note that for every picogram of nickel that is actually fused or reacts to the hydrogen, much more must be added. Not all the
nickel added will react. So if you add 0.1g of Ni to produce 10kWh/h only a small fraction of that Ni will actually be utilized. When the device shuts off due to running out of fuel most of the .1g could be remaining.
- Tungsten is in no way used. However, "other elements" are used.
- Radiation is produced. However in the device demonstrated which is made for commercial use no radiation escapes due to lead shielding. The fact that radiation is produced is proof of a nuclear reaction.
- In the demonstration device for every unit of input there was approximately 37 units of output.
- A small percentage of the nickel is transmuted into copper. The amount of copper found in the cell is far greater than the impurities in the
nickel powder. None of this copper is "unstable."
- There is no radioactivity in the cell after it is turned off. No nuclear "waste."
- All of the information needed to successfully replicate a self sustaining system is in the patent
application (which is being held proprietary presently).
- The power density for thermal energy only is 5 liters per kilowatt.
- The hydrogen has to be all hydrogen with no deuterium or heavy hydrogen.
Apparently, any heavy hydrogen stops the reaction.
- This current system never goes below 6 times more energy out than in. During
the test it produced 20 times more energy out than in. In the lab they have done similar tests and obtained 400 times more out than in, but it produced
Reaction to the Press Conference Announcement
You would think that something of this magnitude would be reported widely by
the media -- at least the alternative media -- but as of Sunday evening, 9:00 pm
MST, there have only been three hits in Google
news, including our story from Friday. It demonstrates to people that the mainstream press is bland, and that they should abandon them as their primary source for interesting news.
At the same time, I can see benefit to the mainstream press ignoring this.
In our audience are some very talented mavericks who can do a lot to help these guys move forward.
One needs to grow incrementally. Too much attention too soon can be
Steven Krivit, who specializes in cold fusion reporting, wrote a couple of
pieces at NewEnergyTimes.com
but both were critical. I wrote the following comment in response, which
I read your two stories at New Energy Times, and while I appreciate the points you brought up, I need to say that Im not convinced that these discredit him substantially.
First, I looked through the https://ingandrearossi.com/
website (linked from the Wikipedia article), which describes the waste-to-energy and imprisonment from Rossis vantage point.
Given how corrupt the various governments of the world have become, it seems to me to be more of a case of suppression on their part than of an act of a serious moral breach on the part of Rossi. At worst, it was a violation of a law unknown to Rossi. We see that kind of thing regularly in the free energy world as outside-the-box inventors try to also run businesses, but dont know how to do so and can get in trouble.
Second, regarding the Journal of Nuclear Physics; again I can relate to Rossi. In a world where academia has spurned cold fusion as a political hot potato, rejecting papers on political, not scientific grounds, I can see why someone would try to provide an alternative method of publishing material along these lines.
I agree that it does look a bit hokey, but I cut him a lot of slack for the above reason. I certainly wouldnt call it a
"scam" as a result.
It seems to me that rather than jumping to a stance of criticism, you should try to encourage and validate the amazing claim.
Though he did spend time in jail, Rossi said
he was eventually cleared of all charges against him in this matter.
Meanwhile, I got a couple of emails from some other associates who apparently
are in process of checking into the claims and the company with the possibility
of striking up a business relationship.
The claims of Rossi are very bold to say the least. They claim to have an industrial product that produces large amounts of energy reliably and safely. This product is not claimed to be a prototype, but is said to be ready to manufacture. These claims deserve serious attention. Could the alternative energy solution we have all been hoping for finally have arrived?
Feature Page at PESWiki
We've created a feature page at https://peswiki.com/index.php/Directory:Andrea_A._Rossi_Cold_Fusion_Generator
with an overview, with key links. Inasmuch as PESWiki is a publicly
editable site, feel free to help us update this page as new coverage comes in
and new developments arise.
# # #
What You Can Do
- Pass this on to your friends and favorite news sources.
- Purchase a unit and/or encourage others who are able, to do so.
- We at PES Network are in a pinch right now. Donations
would be greatly appreciated.
- Subscribe to our newsletter
to stay abreast of the latest, greatest developments in the free energy
- Let professionals in the renewable energy sector know about the promise of
- Consider investing in this group.
This story is also posted at BeforeItsNews
Other PES Coverage
PESN Coverage of LENR
For a more exhaustive listing, see News:Rossi_Cold_Fusion
A Late Night Speculative Raving From Hank Mills - (PESN; October
Andrea Rossi's E-Cat Devours Lockheed's Hypothetical Compact Fusion Reactor - (PESN; October
The Inconel Mouse of Andrea Rossi's E-Cat - (PESN; October
Hell Freezes Over: Brian Ahern's Doubts on E-Cat Test Resolved - (PESN; October
Leaked Second Paper With High Magnification of Rossi's Nickel Particles Brings Replication Closer - (PESN; October
Sterling Allan on Coast to Coast AM about E-Cat breakthrough - (PESN; October
Revealed The Four Horsemen of Andrea Rossi's E-CatLithium Iron Nickel
Hydrogen - (PESN; October 10, 2014)
Fuel Analysis and Validation Paper Posted October 8, 2014 - (PESWiki;
October 9, 2014)
Digest -- August 22, 2014 - Safety Certification Obtained for Low and High Temperature E-Cats
LENR-to-Market Digest -- April 9, 2014 - Rumblings about pending E-Cat test results
LENR-to-Market Weekly -- March 6, 2014 - Lattice Energy transmutation (PESN)
LENR-to-Market Digest -- February 20, 2014 - Rossi Hopes to Retrofit Coal Power Plants With
LENR-to-Market Digest -- February 5, 2014 - Nanors availability announced at Cold Fusion 101 at
LENR-to-Market Weekly -- January 30, 2014 - Industrial Heat acquires E-Cat
LENR to Market Digest, January 22, 2014
- Blacklight Power claims MW capability (PESN)
LENR-to-Market Digest -- January 6, 2014 - Cherokee identified as
Rossi's partner (PESN)