Mylow's lawyer brings MIB guy who takes his motor and papers
Mylow's lawyer brought an unidentified, intimidating man with him last
night, taking his motor, all his papers, leaving him with a note of warning --
only to return the items this morning. Mylow defiantly posts another
video, calling it his last.
YouTube user, MYLOW121363
(Mylow) has stirred up the free energy community in the past couple of weeks
with his numerous videos of a rotating all-magnet motor based on Howard Johnson's
"Stonehenge" model. I've been in touch with him to help him in
his desire to open source his set-up, which appears to be the first
successful replication of Johnson's technology in the three decades since
Johnson first announced his device.
Before getting on a flight this morning to come home from a recent speaking
tour, I sent out a flash message to my mailing lists that Mylow phoned me this morning, distraught and very scared.
He said that last night his lawyer, who he was expecting, unexpectedly brought with him a man in a dark suit and briefcase, who looked and acted very intimidating.
They ended up taking his motor, all his papers, and left him with a note warning him to not say anything about this or to tell anyone or to post any more videos but
said that it was in his best interest to just leave it alone. Mylow said
the paper they provided him with said something about the technology possibly
The suit never identified himself, but asked Mylow how he got this to work, to
which Mylow defiantly replied that he would not tell him.
His attorney kept reassuring him that it had to be this way and urged him to not
Mylow said they were taking all kinds of video and photographs of the motor and
of his papers, including the drawings
he made back when he was a high school student.
Then they picked everything up and took it with them, without an explanation.
He said he had called the police, but they took a long time to arrive, not
getting there until some ten minutes after his lawyer and the suit left.
As he told me about some of this in his first call this morning, I advised him to not go into fear, but to send them love and to not let them scare him.
Nevertheless, Mylow was extremely rattled and cut the call short.
I got on the phone to some of my associates and was recommended that Mylow press charges because a criminal act was carried out against him.
Mylow then phoned back and said that his wife just called him and said that the lawyer and the guy brought all the stuff back in a
box. Mylow told me he was returning home.
As Mylow had instructed her, when they showed up, she called the police, who came
right over, but the guy in the suit told the police something, and they then turned
things around and said that Mylow could be the one in trouble if he didn't comply.
The suit told Mylow, with the Attorney's concurrence, something to the effect: "Don't say anything about this. Just let it drop. It's 'just a toy'; keep it that way. Don't post any more videos on YouTube."
When I talked to Mylow again a little while later, before I had to get on my
7:35 am Pacific flight, he told me that he intends to keep the work going forward. "The spirit of Howard Johnson [inspires] me, and I'm going to bring this forward."
When I phoned the Chicago Police Department, the guy I was talking to was very
impatient with me as I had to pull over to get my computer out to look up
Mylow's address. He told me that they had not received any calls from that
address since January. I presume that the suit was able to dust off the
these tracks they would have otherwise left.
I'm not accusing these guys of tapping phones, but I find it curious that the
lawyer and the suit returned the items quite shortly after Mylow phoned me this
morning to tell me what had happened. I should also mention that in
another phone call I had with Pmmtester who has been screening Mylow's emails
for him, that I was going to place a call to the Chicago Police department, but
then had to postpone that as I was getting out to my car from the Salt Lake City
International Airport. It was at least an hour before I tried again and
talked to the above-mentioned agent.
I later saw the following email he had sent to me this morning at 7:53 am
dear friend device moved to secured local i am been told that it would be in my best interest not to show this to the public. lawer came with some stranger i dont know. my house phone are tap! i will call you
this is to much for me to handle replicate as to the way i have describe look at the pictures in that mag the secrete is in the pictures.i never new that this would work they want me to stop!!!!!!!!!.they took pictures and films.they left and told me to stop.sorry .........but my life come first................................................. they know.
When I talked to Mylow after his lunch hour, he was quite distraught over all
this -- very disheartened. Here he was, just trying to help, and they do
this. He's also expressed a number of times to me his disgust at the
negativity that he finds by a few people (including Omnibus, Paul Lowrance) over on the Overunty.com forum, where
he would have thought he would have gotten more support. His twin
brother's skepticism and lack of accepting this motor, even though he's seen it
in person, has also weighed heavily on him.
All in all, these things have apparently taken a heavy toll on Mylow.
Nevertheless, true to the spirit of his word, he posted a final video this
evening at around 9:30 pm Mountain. I happened see it immediately after it
was posted. I'd not checked all day, and I thought to go see if he might
have something up. It showed "0" views. Now, about 1.5
hours later, there are already 300 views.
(7:47 minutes) [Annotations by Sterling on
[description as Mylow had it before deleting it later in the day] howard johnson magnetic motor - new stator magnet set up
LAST VIDEO I WILL POST. (YouTube;
April 04, 2009)
[Previous description is as follows (removed because of a glitch in the
recording)] howard johnson magnetic motor - NOT A SELF STARTER .new
stator setup sorry no glass table will not continue this project i am
not responsible what others do to make some thing like this i am not
asking for any credet or any other thing.if you can make this work
better then i i wish you luck this want easy for me and my wife to my
brother you are they must sciptcal person in the world and i repsect
your comments and advice if it wasnt for you i would of gave up.thank
you everyone for opening up my eyes to the real world.have fun all and
be responsible. (YouTube;
April 04, 2009)
There is no vocal commentary from him like there was in his previous videos, just the
audio on, so you see and hear the motor running quietly, with the rotor turning.
Though it runs slowly, it does actually speed up at the beginning, as he had
apparently just started it before turning on the camera.
When I phoned him after seeing this new video, he said that when he tried to
move the stator magnet closer it goes too fast and the rotor magnets begin to
come unglued and are thrown off.
Note that the rotor magnet arrangement here is different than for the weaker
iron magnet he was using before. As mentioned yesterday,
with the new alnico
magnet (HS811N) that he received from me on Wednesday, he's had to rearrange
the rotor magnets into seven sets of seven and one set of six, with a larger gap
between the last set of six and the first set of seven.
He told me that previously he was playing with the larger stator magnet I sent
him (HS90), that he had to do the rotor in sets of 5 and 2 and 3, with varying
gaps between them to get it to work. He described it as "violently
strong," saying that it "flew apart."
As he mused over the situation or predicament he's gotten into, he wondered what
Howard Johnson might be thinking, looking over this. He said he planned to
make a trip to his graveside and pay him his respects. "I don't want
anything in return for this. I just want people to know what a genius
Howard Johnson is." But in the same breath, he remarked how
"simple" the design is.
"Once you've made this, you can take it apart and put it back together
again." He compared it to coming up with a recipe for a good
pie. "You won't forget the ingredients."
In all the reading he's been doing on Howard Johnson's work, he thinks there is
"something going on at the atomic level". Again he commented on
how very cold the stator magnet was as the motor was spinning. He said the
thermometer he had used yesterday showing a diminished temperature (13 degrees)
of the stator magnet a couple minutes after he had stopped the motor, was one
you put in your mouth. It has a digital readout, showing either F or C.
I encouraged to take a little breather, but to not give up on the project, as it
is just beginning and will surely bring forth lots of fruit. Drawing from
an analogy he brought up, I compared it to childbirth. Labor might not be
fun, but once the baby is out, it will all be worth while.
I am actually surprised that others haven't yet been able to replicate
this. I guess the magnet sourcing issue has proven a fairly significant
I'm working on an instruction manual that I had hoped would be done today, but
it may take yet another day or so. As I see it, this really is a very
simple system -- so easy a Junior High student could build it. Once we get
some demand going, I'm guessing that the materials could be obtained for less
This is going to get real exciting as more people start reporting what
combinations give the best results, how to get more torque, what materials are
optimal, what materials don't work. A brand new industry is about to be
launched into the public's awareness and participation. We don't need the
government or angel investors to bring this forward. This can be brought
forth through a grassroots effort.
# # #
(From two weeks ago.)
Mylow's replication of the Howard
Johnson magnetic motor (YouTube
originally posted by MYLOW12136;
March 17, 2009)
All-Magnet Motor "Not a Fake" - Mylow gives more
info about how his motor works, how the recent episode with the MIB
guy (NSA) rattled him, tells of non-symmetric polarity in his stator
magnet, encourages replication attempts. (PESN; April 6, 2009)
Magnetic Motor based on Howard Johnson's Design - YouTube user
"Mylow" of Chicago has apparently successfully replicated
and is now open sourcing the late Howard Johnson's all-magnet motor,
Stonehenge model, that Johnson worked on in the early 1980s to
demonstrate to the U.S. Patent Office. (PESWiki; March 18,
Gets His All-Magnet Motor Running Again - Mylow has received
the alnico magnets I sent him. He said one of them worked so well that
the centripetal force of rotation made some of the rotor magnets fly
off. (PESN; April 1, 2009)
Mylow Replicated Howard Johnson's Magnet Motor - Story of how
a garage tinkerer's 30-years of persistence finally paid off in
replicating one of the first publicly announced all-magnet motors. He
doesn't seem to realize how much of his own inventiveness came to
bear. (PESN; March 20,
There has been a lot of commentary about Mylow making the statement a number of
places yesterday that this is "a fake." Being intimate to this
situation and to him, I am nearly certain that he does not really mean to
declare that this has been one big hoax from the beginning, which is how many
are taking it. Rather, this is his way of showing his sarcastic disgust at
the negativism that has been thrown at him, including by many that he
anticipated would have been friendly and helpful. In the same breath that
he calls it a "fake", he expresses his hope in the replication
efforts, and states his intention to pursue it quietly.
On April 05, 2009 12:38 PM, John
Bedini wrote: (Slightly edited; links added)
I don't talk very much about different things. But I feel that I must say this to you. Mylow should have started a group long ago and had all the skeptics goof everything up like they did the
SG, some times it's better to take that kick in the pants and not say anything to anybody about your sad moments.
I know you have built magnetic motors which did not work, you claimed the SG did not work but so what, as others did get it to work and are very happy. The mistake with Mylow is he did not have any protection because he did not have enough failures in the public groups like I did.
I now sit back and thank you for all the public attacking of my machine with all the negative comments, people only
have to look at that group to see the bashing that has gone on with a simple invention.
As Mylow found, out changing things only causes failure; and it is reported that
way. That is protection; and "THEY" do not come looking then.
If you remember, there are DVD's on Howard
Johnson, books and associated articles. Anybody can make this work at a very limited
level: no power and low speed. A real, true magnet motor has a speed of 5000 RPM's and "THEY" will take that from you, and you will never talk again about it.
Mylow's machine does prove over unity of >1 but you could not take any power from that. What I see is that the only hope that people have at this time because of mind blocks in physics is solar panels, wind machines, water power, and combustion. We have not even got out of the dark ages in the way we think. We are all brainwashed into thinking physics is just one way only, what a mistake. What would happen if all the power systems would fail today what would you do?
What is free energy since nothing is free out there, it cost for everything, and you must pay for it with phony money you work hard for.
Mylow is lucky as MIB's do not take things from you and then bring them back.
You get two choices in life, MONEY or DEATH. This was not the secret people in black taking things away, because you never talk again about
it. Mylow is now branded as a quack, just like Howard Johnson. I did follow his progress and only to see all the skeptics appear and try to build his vision of Howard Johnson's
motor. They changed it so now it does not work, that is [the] next attack.
The magnets are very easy to make. No big deal, as regular horseshoe magnet work the
same. It's just a spacing difference, but must be set up the same.
Just wait until the great Obama change takes effect: no money, no food, no energy, just candles for
light -- if you can get them -- and many homeless walking the streets. "NO ENERGY FOR
What Mylow saw as a wave was magnetic streams; no electrons at all, since there are none; and no one has ever seen
one. Yes, pure magnetic streams with all the power of the universe at one's finger tips.
My heart goes out to Mylow and his family for his hard work but the mistake is already made.
You have my permission to print this as I hide nothing.
cc Rense/ Tom Bearden/ Tony C
cc all the groups.
"It is harder to crack a prejudice than an atom." // "I'd rather be an optimist and a fool than a pessimist and
right." -- Albert Einstein
ADVISORY: With any
technology, you take a high risk to invest significant time or money
unless (1) independent testing has thoroughly corroborated the
technology, (2) the group involved has intellectual rights to the
technology, and (3) the group has the ability to make a success of
truth passes through three stages:
First, it is ridiculed;
Second, it is violently opposed; and
Third, it is accepted as self-evident.
Arthur Schopenhauer (1788-1860)
"When you're one step ahead
of the crowd you're a genius.
When you're two steps ahead,
you're a crackpot."