http://pesn.com/2010/07/31/9501681_Revealing_What_I_Know_About_Building_the_Perendev_Magnet_Motor/
You are here: PureEnergySystems.com
> News > July 31, 2010
Revealing what I know about building the Perendev magnet motor >
Witnesses
Having honored the NDA long after the term expired, given new
unsettling developments I now reveal blueprints, photos, and other insider
information in hopes that it might help the many people out there trying to
replicate Michael Brady's all-magnet motor.
The guy on the right (I don't recall his name; it's in my voluminous notes
somewhere) is the one who, while sitting at the kitchen table with
us, looked me in the eye and very seriously said "Yes" when I asked
him if he had seen the motor running. He was one who put up quite a bit of
capital toward the project.
Emails
2. Saw It At His House
From: Spam Me
To: sterlingda...
Sent: Wednesday, September 16, 2009 3:17 PM
Subject: Magnetic Motor
Hi Sterling
I have been doing some serious reading on the perendev device and other magnetic motors, and stumbled across your posts on freeenergynews.com. And wow, I surprised at how well you knew Mike Bradey, I personally know him as well as I am from South Africa and have been at his house as well.
Anyway, I thought I would come into contact with you, because I have in fact seen Mike's magnetic motor
work... the footage on Youtube... I could not say for sure if it is the same footage that I saw that was recorded, but I would recognise the ugly green carpet he had at his house in Johanesburg any day :). Just so you know I am telling the truth, you may remember that his house was across the road from a Jewish Synagogue across the road from his, and back then you may also recall that he was already talking about people wanting to buy his house to flatten it - well, they have done that already, not long after he left for Germany I think.
Anyway, it was while visiting his house in Johannesburg as a service provider that we got talking and I got to know Mike Bradey, and exactly how he is, and yes, he is a nice guy, but just a little "touched"... and for some reason I always ended up going back to see him to catch up.
None the less, that is what has sparked my interest in magnetic motors, and alternative energy, and I have also spoken to him about investment, but of course without anything substantial from his side as to what the investment will provide, or provision of patents, etc it never came to light.
Anyway, long story made short, I would like to catch up with you if at all possible, perhaps we can converse by eMail or by phone or by Skype, whichever is more comfortable to you - I would like to catch up on things, and see what can be done - as I say I have seen his motor work... yes, there were issues and he has changed things since then, and there could be improvement, but I have certainly seen it work.
Looking forward to hearing from you.
Kind Regards
JR
* * * *
3. Saw It Run In Germany for 20 Minutes
Correspondence in reverse chronological order (oldest first)
From: "S... A..." <...@bss.lk>
To: "Sterling D. Allan"
Sent: Tuesday, January 24, 2006 1:14 AM
Subject: Re: [perendev] Fw: Motor flew apart ?
for about 20 mins.why? cos i did not wanted to see more so they stopped it.
[...]
"Sterling D. Allan"
Subject: Re: [perendev] Fw: Motor flew apart ?
01/24/06 10:09 AM
You saw mg motor running? How long?
----- Original Message -----
From: "S... A..." <...@bss.lk>
To: "Sterling D. Allan" <sterlingda@pureenergysystems.com>
Sent: Monday, January 23, 2006 8:10 PM
Subject: Re: [perendev] Fw: Motor flew apart ?
hi allan
i just meant i saw it.cos i specially went to see it in munich(Im from Sri
Lanka),and i met all the guys including braddy himself. They have many more
other developments apart from MG motor.
iv been trying to get hold of u many times but no answer provided.Im
really looking in to this mg motor cos i been trying to get develop one on
my own for the last 16 years,since i heard someone else doing it i thought
why should i waste my time since i can buy one and put on my other
products.so let me know when u are done for god sake.
"Sterling D. Allan"
Subject: Re:
[perendev] Fw: Motor flew apart ?
01/23/06 09:15 PM
Hello ***,
I don't think that is something someone would forget. If you saw it, you
would remember. I'm puzzled by "I think I saw"
No, they are not manufacturing yet, that I know of.
----- Original Message -----
From: "S... A..." <...@bss.lk>
Sent: Sunday, January 22, 2006 8:21 PM
Subject: Re: [perendev] Fw: Motor flew apart ?
have perendev done the manufaturing of motor yet , hi allan i think i saw
his motor in germany it was quiet good that time
Around
Johannesburg - including the machine shop we went to to pick up
the newly fabricated motor components (rotors and stators); neighbor
Nielson Mandela's home; opulence/poverty contrast; street vendors
Brady's
House - including a shot of the kitchen table I was sitting at
when a witness confirmed he had seen the motor running
History Snapshots
- of various iterations also tried and claimed to work
Aluminum
Version (pre-dated the polypropylene version seen in the video)
Perendev
Power -- First-Hand Report - Sterling D. Allan gives a history
of his interaction with Michael J. Brady over three years in process
of securing the North American rights to manufacture and market the
magnet motor. (FreeEnergyNews; March 18, 2004)
